Multiple handset use
16
Push-to-talk (PTT)
PTT call to a group of handsets
When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls
when 2 to 5 handsets are registered, and a maximum of one-to-three calls
when 6 or more handsets are registered. The first 4 registered handsets will be
able to use this feature.
To call a group of handsets:
1. When the handset is not in use:
Press and hold PUSH TO TAL� until your handset screen shows
Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other eligible handsets automatically
activate.
2. You need to press and hold PUSH TO TAL� when you want to speak.
Speak towards the handset. Your voice is broadcast to all eligible handsets.
3. Release PUSH TO TAL� after speaking.
4. Any extension can reply (see Answer a PTT call).
Answer a PTT call
You can respond to a PTT call whenever the speakerphone light is off, as
described below.
When your handset receives a PTT call, the handset beeps and the screen
shows Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and
your handset shows PTT From HS X To HS X (the first X represents the
initiating handset number, the second X represents your handset number;
a maximum of four handset numbers appear).
When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TAL� on your handset. You will
hear a chirp. Speak towards the handset. Your voice is broadcast to all
destination handsets.
After speaking, release PUSH TO TAL�. Your handset will beep.
After the beep, if your speakerphone light is off, you can press and hold
PUSH TO TAL� to continue speaking, or a destination handset
can respond.
•
1.
2.
3.
To Next Page
Loading...
Need help?
General
