Answering system
23
Answering system settings
Answer on/off
By default, the answering system is on and ready to record messages. If you
turn the answering system off, it does not answer calls and record messages.
To turn the answering system on or off:
Using the telephone base:
Press /ANSWER ON to turn the answering system on
or off.
Using a handset:
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to >Answer ON/OFF, then press
MENU/SELECT.
4. Press qCID or pDIR to highlight >On or >Off, then press MENU/SELECT
to save the setting..
Call screening
Use this feature to choose whether incoming messages can be heard over
the telephone base speaker when they are being recorded. If you turn call
screening on, you hear the incoming message.
To change the setting:
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to >Ans sys setup, then press MENU/SELECT.
4. Press MENU/SELECT to select >Call screening.
5. Press qCID or pDIR to choose >On or >Off.
6. Press MENU/SELECT to save the setting.
•
To Next Page
Loading...
Need help?
General
