Directory
19
Speed dial
The telephone system has 10 speed dial locations (2-9 and 0, location 1 is
reserved for voicemail) where you can store the telephone numbers you wish
to dial more quickly. You can store up to 30 digits in each location. Speed
dial assignments can only be selected from the existing directory entries,
with the exception of 1, which must be manually entered. In the directory,
speed dial locations except for 1 are indicated by their number in the
bottom right hand corner of the entry.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial location (2-9, 0),
then press MENU/SELECT. The screen briefly shows Copy from Directory...
and then enters your directory list.
5. Press qCID or pDIR to scroll to the phone number you wish to assign to
the selected speed dial location.
6. Press MENU/SELECT to save.
Assign your speed dial voicemail number
See the Set speed dial voicemail number section on page 8 for instructions
on assigning your speed dial voicemail number.
Make a call using speed dial
When in idle mode, press and hold the dialing key (2-9, 0) corresponding to
the assigned location you wish to call.
Check your voicemail using speed dial
Press and hold the 1 key on your handset to dial your voicemail number.
To Next Page
Loading...
Need help?
General
