11
Initial basic settings
Aer you install your telephone or power returns following a power outage, the
handset and telephone base will prompt you to set the date and time. To skip
setting the date and time, press on the handset or CANCEL on
the telephone base.
Voice guide to set Smart call blocker and
answering system
Aer the date and time setting is done or skipped, the telephone base will prompt
if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call
blocker setup via voice guide. To skip the setup, press CANCEL on the telephone
base.
Aer the Smart call blocker setting is done or skipped, the telephone base will then
prompt if you want to set up the answering system. Press MENU/SELECT to start the
answering system setup via voice guide. To skip the setup, press CANCEL on the
telephone base.
We recommend you program your telephone system before use. The following are
a few examples of common features to set before using the telephone. Refer to the
Handset settings, Telephone base settings and Answering system settings in the
Complete user’s manual for detailed instructions on setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using the cordless handset or the telephone base:
1. -> or -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys -> SELECT.
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> SELECT.
Smart call blocker setup via voice guide
You can follow the voice guide to set up Smart call blocker.
Using the telephone base:
1. CALL BLOCK.
2. / -> Voice guide -> SELECT.
3. Press 1 if you want to screen calls with telephone numbers that are not saved in
your directory, allow list or star name list; or press 2 if you only want to screen
calls that do not display a phone number; or press 3 if you do not want to screen
calls, and want to allow all incoming calls to get through.
To Next Page
Loading...
Need help?
General
