AT&T CL83415 User Manual

Telephone settings
34
Telephone base settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold X/DELETE until the digits are deleted, and then press MENU/SELECT.
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to highlight Touch-tone or Pulse,
then press MENU/SELECT. The screen shows
DIAL MODE is touch-tone or DIAL MODE is pulse.
There is a confirmation tone and the screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to Web address, then
press MENU/SELECT.
www.telephones.
att.com
> Web address
Settings
p
q
DIAL MODE
>Touch-tone
p
q
Home area code
>Dial mode
p
q

AT&T CL83415 Specifications

General

Brand	AT&T
Model	CL83415
Category	Cordless Telephone
Language	English