Call block
Call block
Delete a call block entry
1. Search for the desired call block entry (see Review the call block list on
page 78).
2. When the desired entry displays, press X/DELETE on the telephone base.
3. The screens shows Deleted. Then, the next entry displays. You cannot
retrieve a deleted entry.
Block calls without number
You can use this feature to reject all incoming calls which are “out of area”
or with numbers set to “Private”.
1. When the telephone base is in idle mode, press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Call block, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to Calls w/o num,
then press MENU/SELECT.
4. Press qCID or pDIR to select Not block or Block,
then press MENU/SELECT.
Mute first ring of blocked calls
An incoming call will ring once and then the system will check if the call
should be blocked. You can mute the first ring of blocked calls.
1. When the telephone base is in idle mode, press
MENU/SELECT.
2. Press 7464#.
3. Press qCID or pDIR to scroll to select On or Off,
then press MENU/SELECT.
>Not block
Block
p
q
Block list
>Calls w/o num
p
q
MUTE FIRST RING
>On
p
q
80
To Next Page
Loading...
Need help?
General
