AT&T CL83415 User Manual

Telephone operation
45
Options while on calls
To transfer an outside call from the telephone base:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose Transfer.
If your have one handset and no other registered
devices, the outside call is put on hold and the
telephone base shows Transferring call.... The
handset rings and shows Transfer from BASE 0
(BASE represents the base name).
If you have other registered device(s) or more than
one handset, the telephone base shows TRANSFER
TO: Use the dialing keys to eenter a specific handset
number (1-9 for handsets 1-9, TONE followed by
0-2 for handsets 10-12, or TONE followed by
#
for all handsets), or presspress qCID or pDIR to scroll to
the desired handset and press MENU/SELECT. The outside call is put on
hold and the telephone base shows Transferring call... or Transferring
call to all.... The other handset(s) rings and shows Transfer from BASE 0
(BASE represents the base name).
3. To answer the call on the destination handset, press, press PHONE/FLASH or
/SPEAKERSPEAKER. The telephone base shows Call transferred and goes to
idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is answered,
press OFF/CANCEL, PHONE/FLASH or /SPEAKERSPEAKER on your handset, or CANCEL or
/SPEAKERSPEAKER on your telephone base.
If the other device does not answer the transfer within 30 seconds, the transfer ends and the
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
•
•
•
•
>T ra ns fe r
In te rc om
p
q
Speaker 0:00:12
6:30
AM
8/06
TRANSFER TO:
> H a n d s e t 2
p
q

AT&T CL83415 Specifications

General

Brand	AT&T
Model	CL83415
Category	Cordless Telephone
Language	English