AT&T CL83415 User Manual

Answering system
Answering system settings
To record a new outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press MENU/SELECT to select Record annc. The system
announces, “Record after the tone. Press 5 when you are
done.”
5. Speak towards the handset to record your announcement.
Press 5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
MENU/SELECT.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press MENU/SELECT again to select Record annc. The system announces,
“Record after the tone. Press 5 when you are done.”
5. Speak towards the telephone base to record your announcement. Press 5
to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll
to Play annc and press MENU/SELECT.
-OR-
1. When the telephone base is in idle mode, press
•/RECORD.
2. Press qCID or pDIR to scroll to Announcement and
press MENU/SELECT. The system announces, “Record
after the tone. Press 5 when you are done.”
3. Speak towards the telephone base to record your
announcement. Press 5 to end recording. Your recorded
announcement plays.
>Record annc
Play annc
Play annc
>Record annc
p
q
82
Record memo
>Announcement
p
q

AT&T CL83415 Specifications

General

Brand	AT&T
Model	CL83415
Category	Cordless Telephone
Language	English