38
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any handsets.
To start the paging tone:
Press LOCATOR at the telephone base. Paging all
handsets appears on the screen and the paging tone
sounds on all handsets for 60 seconds.
NOTE: If you press OFF/CLEAR or MUTE/DELETE on a handset,
the ringer of that handset stops, but the paging to the rest of the
handsets continues.
To stop the paging tone:
Press PHONE/FLASH, /SPEA�ERSPEA�ER, or any dial pad
keys (0-9, TONE , or #) on the handset(s).
-OR-
Press LOCATOR on the telephone base.
Join a call in progress
If a handset or telephone base is already on a call, you can join the call.
Using a cordless handset:
Press PHONE/FLASH or /SPEA�ERSPEA�ER on another cordless handset.
Press OFF/CLEAR or place the handset in the handset charger to end the
call. The call does not end until all handsets and the telephone base hang up.
Using the telephone base:
Lift the corded handset or press SPEA�ER on the telephone base.
Return the corded handset to the telephone base or press SPEA�ER to
hang up. The call does not end until all handsets and the telephone base
hang up.
NOTE: You can use up to four system handsets and the telephone base at the same time
on an outside call.
•
•
Multiple handset use
**Paging**
Paging
all handsets
To Next Page
Loading...
