41
Call transfer using intercom
Use the intercom feature to transfer an outside call to the telephone base or
a cordless system handset.
Using a cordless handset:
1. During a call, press INT.
If you have a single handset system, the outside call
is put on hold and your handset screen shows
Calling base. The telephone base rings and its
screen shows HANDSET is calling.
If you have more than one handset, your screen
shows INTERCOM TO:. Use the dial pad keys to
enter a handset number. The outside call is put on
hold and your handset screen shows
Calling HANDSET X. The other handset rings and
its screen shows HANDSET X is calling.
-OR-
Enter 0 to transfer to the telephone base. The
screen shows Calling base. The telephone base
rings and its screen shows HANDSET X is calling.
2. To answer the call on the other handset, press, press
PHONE/FLASH, INT, /SPEA�ERSPEA�ER, or any dial pad
keys (0-9, TONE or #). The outside call is still on
hold and both handsets now show Intercom. You can
now talk without the outside caller hearing the conversation.
-OR-
Press INTERCOM or SPEA�ER on the telephone base or any dial pad keys
(0-9, TONE or #), or lift the corded handset to answer the intercom call.
You can now talk without the outside caller hearing the conversation.
NOTES:
1. To cancel the transfer and return to the external call before the intercom call is answered, press
OFF/CLEAR, PHONE/FLASH or INT on your handset.
2. If the other handset does not answer the intercom call within 100 seconds, or if the other
handset is in the directory or call log mode, or is out of range, the calling handset shows
Unable to call. Try again and automatically returns to the external call.
3. From this intercom call, you have the following options:
You can transfer the call. Press MENU/SELECT twice to
highlight Transfer on the calling handset. Your screen
shows Call transferred. The other handset automatically
connects to the outside call.
You can let the other handset join you on the outside
call in a three-way conversation. Press MENU/SELECT.
Press qCID or pDIR to highlight Share call on the
calling handset, then press MENU/SELECT.
•
•
•
•
>Transfer
Share call
Multiple handset use
Call
transferred
INTERCOM TO:
Calling
base
HANDSET
is calling
Intercom
11:35
AM
12/02
To Next Page
Loading...
