56
Caller ID operation
Dial a call log entry
To dial a call log entry when in the call log:
Using a cordless handset:
1. Press qCID or DIRp to browse.
2. Press PHONE/FLASH or /SPEA�ERSPEA�ER to dial the entry.
Using the telephone base:
1. Press q/CID or p/DIR to browse.
2. Press SPEA�ER or lift the corded handset to dial the entry.
Delete entries
Using a cordless handset or the telephone base:
Press MUTE/DELETE on the cordless handset or X/DELETE on the
telephone base to delete the displayed entry from the caller ID history.
Follow the steps below to delete all call log entries.
1. Press MENU/SELECT when in idle mode.
2. Press qCID or pDIR on a cordless handset, or
press q/CID or p/DIR on the telephone base to
scroll to >Call log, then press MENU/SELECT.
3. Press qCID or pDIR on a cordless handset, or
press q/CID or p/DIR on the telephone base
to scroll to >Del all calls, then press MENU/SELECT.
4. When the screen shows Delete all calls? press
MENU/SELECT to clear the caller ID history of
all entries. There is a confirmation tone. Press OFF/CLEAR on the
cordless handset or CANCEL on the telephone base to exit without
deleting any entries.
Save a call log entry to the directory
Using a cordless handset or the telephone base:
1. When in the call log, Press qCID or pDIR on a cordless handset, or press
q/CID or p/DIR on the telephone base to browse.
2. Press MENU/SELECT to choose an entry. The screen displays EDIT NUMBER.
3. Use the dial pad keys to edit the number.
Press qCID or pDIR on a cordless handset, or press q/CIDCID or p/DIRDIR
on the telephone base to move the cursor to the left or right.
Press MUTE/DELETE on the cordless handset or X/DELETE on the
telephone base to backspace and erase a digit.
•
•
•
•
Caller ID
Review
>Del all calls
Review
>Del all calls
To Next Page
Loading...
