Telephone operation
33
Telephone operation
To redial a number:
Using a cordless handset:
To dial the displayed number, press PHONE/FLASH or /SPEAKERSPEAKER.
-OR-
Press PHONE/FLASH or /SPEAKERSPEAKER, then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
Using the telephone base:
To dial the displayed number, lift the corded handset or press /SPEAKERSPEAKER.
-OR-
Lift the corded handset or press /SPEAKERSPEAKER. Then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
To delete a redial entry:
Using a cordless handset:
While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
Using the telephone base:
While the screen displays the desired number, press X/DELETE to delete
the number from the redial memory.
Equalizer
The handset and base equalizers enable you to change the quality of the
audio to best suit your hearing.
While on a call or intercom call, or listening to a message or announcement,
press EQ on the cordless handset or base to select the equalizer setting
Treble 1, Treble 2, Bass or Natural (the default setting). The current setting
is shown on the handset or base screen for two seconds.
NOTES:
If you switch the call between the handset and the speakerphone by pressing /SPEAKER, the
audio setting remains unchanged.
The current equalizer setting remains unchanged until a new setting is selected.
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
