AT&T CL84202 User Manual

Multiple handset use
40
Intercom
Use the intercom feature for conversations between two handsets, or a
handset and the telephone base. You can buy additional expansion handsets
(model AT&T CL80111) for this telephone base to expand your telephone
system (up to 12 handsets).
Using a cordless handset:
Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT.
If you have one handset, the handset shows Calling base.
If you have more than one handset, the handset shows
INTERCOM TO: Use the dialing keys to eenter a specific
device number (0 for the telephone base, 1-9 for
handsets 1-9, TONE followed by 0-2 for handsets
10-12, or TONE followed by
#
for all devices), or press
qCID or pDIR to scroll to the desired device and press
MENU/SELECT. Your handset screen shows Calling
HANDSET X, Calling BASE 0 or Calling all devices.
The destination device(s) rings and shows HANDSET is
calling, HANDSET X is calling or HANDSET X is calling all
(HANDSET represents the handset name, X represents the
handset number).
2. To answer the intercom call, press PHONE/FLASH,
/SPEAKERSPEAKER or any dialing key (0-9, TONE , or
#
) on the
called cordless handset. Or on the called telephone base,
press /SPEAKERSPEAKER or any dialing key (0-9, TONE , or
#
), or
lift the corded handset. Both devices now show Intercom.
3. To end the intercom call, one party presses OFF/CANCEL or places the
cordless handset back in the charger, presses CANCEL on the telephone
base, or hangs up the corded handset. The other party hears four beeps.. The other party hears four beeps. The other party hears four beeps.
Both devices display Intercom ended.
1.
•
•
Calling
BASE 0
HANDSET X
is calling
Intercom
12/02 11:35
AM

AT&T CL84202 Specifications

General

Brand	AT&T
Model	CL84202
Category	Telephone
Language	English