Multiple handset use
45
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single handset. When the
telephone base is not in use:
If you have one handset, press and hold PTT.
If you have more than one handset:
w Press PTT. Then use the dialing keys to enter the
destination handset number.
-OR-
w Press qCID or pDIR to highlight the destination
handset number. Then press MENU/SELECT or PTT.
The telephone base shows Connecting to HANDSET X...
(HANDSET represents the handset name, X represents
the destination handset number)
for a few seconds. When
the connection is made, both the telephone base and
destination handset display Press and hold [PTT] to talk.
2. Press and hold PTT. A chirp indicates your microphone
is on. Speak towards the telephone base. Your voice is
broadcast to the destination handset.
While you are speaking, the telephone base shows PTT
To handset: X.
3. Release PTT after speaking. Both devices beep once
again and the screens show Press and hold [PTT]
to talk. Then you can press and hold PTT to continue speaking or the
destination device can respond (see Answer a PTT call on page 47).
4. To end the PTT call, press CANCEL. The telephone base shows
Push to talk Ended for a few seconds.
•
•
PTT To
handset: X
Connecting to
Handset X...
Press and hold
[PTT] to talk
PUSH TO TALK
>Handset X
p
q
To Next Page
Loading...
