AT&T CL84202 - Page 73

Answering system
67
Answering system settings
To record a new outgoing announcement:
Using a cordless handset:
When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
Press qCID or pDIR to scroll to >Answering sys, then press
MENU/SELECT.
Press MENU/SELECT again to select >Announcement.
Press qCID or pDIR to scroll to >Record annc and press MENU/SELECT.
The system announces, “Record after the tone. Press 5 when you are done.”
Speak towards the handset to record your announcement. Press 5 to end
recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to >Play annc and
press MENU/SELECT.
Using the telephone base:
When the telephone base is in idle mode, press MENU/SELECT to enter the
main menu.
Press qCID or pDIR to scroll to >Answering sys, then press MENU/SELECT.
Press MENU/SELECT again to select >Announcement.
Press qCID or pDIR to scroll to >Record annc and
press MENU/SELECT. The system announces, “Record
after the tone. Press 5 when you are done.”
Speak towards the telephone base to record your
announcement. Press 5 to end recording. Your
recorded announcement plays.
To listen to the recorded announcement again, scroll to
>Play annc and press MENU/SELECT.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Play annc
>Record annc
p
q
Play annc
>Record annc
p
q
>Announcement
Delete all old
p
q