AT&T CRL32302 - Handset Settings; Ringer Volume; Ringer Tone

12
Telephone settings
Handset settings
Ringer volume
You can set the ringer volume level to one of six levels or
turn the ringer off. When the ringer is off,
appears on
the screen.
Press MENU/
SELECT in idle mode to enter the
main menu.
Use
qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
Press
MENU/SELECT again to select >Ringer volume.
Press
qCID or pDIR to sample each volume level.
Press
MENU/SELECT to save your preference. There is
a confirmation tone and the screen returns to the
previous menu.
NOTES:
The handset ringer volume also determines the ringer volume for
intercom calls.
If the ringer volume is set to off, that handset is silenced for all incoming calls. However,
the handset still plays the paging tone when responding to the handset locator.
If the ringer volume is set to off, caller ID will not be announced and Caller ID won’t be
announced displays briefly on the screen.
Ringer tone
You can choose one of 10 ringer tones for the handset.
Press MENU/
SELECT in idle mode to enter the
main menu.
Use
qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
Press DIR or CID to scroll to >Ringer tone, then press
MENU/SELECT.
Press
DIR or CID to sample each ringer tone.
Press
MENU/SELECT to save your preference. There is a confirmation tone
and the screen returns to the previous menu.
NOTE: If you turn off the handset ringer volume, you will not hear ringer tone samples.
1.
2.
3.
4.
5.
•
•
•
1.
2.
3.
4.
5.
>Ringer volume
Ringer tone
RINGER VOLUME
Intercom
>Ringers
RINGER TONE
>Tone 1