AT&T CRL32302 - Temporary Tone Dialing; Blind Transfer

27
Telephone operation
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
1. During the call, press MENU/
SELECT.
2. Press
MENU/SELECT to choose >Transfer.
If you have two handsets, the outside call is put on
hold and your handset shows Transferring call...
The other handset rings and shows Transfer from
other handset.
If you have more than two handsets, your screen
shows TRANSFER TO:
Use the dialing keys to eenter a
specific handset number (1-9 for handsets 1-9, TONE followed by 0-2 for
handsets 10-12, or TONE followed by # for all handsets), or press qCID or
pDIR to scroll to the desired handset and press MENU/SELECT. The outside
call is put on hold and your handset screen shows Transferring call... or
Transferring call to all... The other handset rings and shows Transfer from
HANDSET X (X represents the handset number).
3.
To answer the call on the destination handset, press, press PHONE/FLASH or
/SPEA�ERSPEA�ER, or any dialing key (0-9, , or #). The initiating handset shows
Call transferred and goes to idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is
answered, press
OFF/CANCEL on your handset.
If the other handset does not answer the transfer within 30 seconds, the transfer ends and
the original handset rings while showing No response to transfer. If the original handset does
not pick up within 30 seconds, the handset returns to idle mode and the outside call ends.
•
•
•
•
Options while on calls
>Transfer
Intercom