28
Multiple handset use
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any
handsets.
To start the paging tone:
Press
/HANDSET LOCATOR on the telephone base to
start the paging tone on all handsets for 60 seconds.
NOTE: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that handset
stops, but the paging to the rest of the handsets continues.
To stop the paging tone:
Press
PHONE/FLASH, /SPEA�ERSPEA�ER, or any dialing key (0-9, TONE , or #)
on the handset(s).
-OR-
Press
/HANDSET LOCATOR on the telephone base.
Join a call in progress
When a handset is already on a call and you would like to join the call, press
PHONE/FLASH or /SPEA�ERSPEA�ER on your handset.
Press
OFF/CANCEL or place the handset in the telephone base or charger to
end the call. The call does not end until all handsets hang up.
NOTE: You can use a maximum of four system handsets at the same time on an outside call.
•
•
•
To Next Page
Loading...
