123
Smart call blocker
Call block settings
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a P appears).
4. Edit the existing name, then press Save .
f Press / to move the cursor to the le or right.
f Press 0 to add a space.
f Press Backspace to erase a digit.
f Press and hold Backspace to erase all digits.
f Press TONE to change the next letter to upper or lower case.
Delete a block entry:
Using a cordless handset:
1. Search for the desired entry in the block list (see Review block list on page
121).
2. When the desired entry displays, press MUTE/DELETE. The screen shows
Delete entry?.
3. Press MENU/SELECT to confirm. The screen show Deleting.... You hear a
confirmation tone. You cannot retrieve a deleted entry.
Using the telephone base:
1. Press Menu soft key, and then press Block list .
2. Press Block number smart key, and press / to review and browse
through the block list.
3. When the desired entry displays, press the smart key to unblock. The
screen shows Unblock entry? with the entry name and telephone number.
4. Press Yes to unblock.
Delete all block list entries:
Using a cordless handset:
1. Press CALL BLOCK when the telephone is not in use.
2. Press qCID or pDIR to scroll to Block list, and then press MENU/SELECT.
3. Press qCID or pDIR to highlight Delete all, then press MENU/SELECT. The
handset shows Delete all?.
4. Press MENU/SELECT again to confirm. The handset displays Deleting.... There
is a confirmation tone.
To Next Page
Loading...
