AT&T DLP73590 - Answering System; Answering System Settings; Announcement

145
Answering system settings
Use the answering system menu to set up the announcement message, turn on
or o the answering system or message alert tone, activate call screening, or
change the number of rings, remote access code or message recording time.
Announcement
Your outgoing announcement plays when calls are answered by the answering
system.
The telephone has a default outgoing announcement, “Hello,
please leave a message aer the tone.” You can use this
announcement, or record your own.
To record a new outgoing announcement:
Using a cordless handset:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to scroll to Answering sys, then press
MENU/SELECT .
3. Press MENU/SELECT to select Announcement.
4. The handset displays Play [2] Del [3] Rec [7] and it
announces, “To play, press 2. To record, press 7.” Press 7 to
record. The handset announces, “Record aer the tone.
Press 5 when you are done.”
5. Aer the tone, speak towards the handset or telephone
base microphone. Press 5 to end recording. The newly
recorded announcement automatically plays.
To listen to the recorded announcement again on the
handset, wait aer playback has completed, then press 2.
Using the telephone base:
1. Press Menu sokey, and choose Answering system .
2. Press Outgoing announcement .
MENU 1/2
Answering
system
Smart call
blocker
Directory Block list
Caller ID log Intercom
Next
ANSWERING SYSTEM 1/2
Message
list
Record memo
Next
Delete all old
Answer ON/OFF
Outgoing
announcement
Voice guide
Answering system
Answering sys
ECO
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO
Recording... Stop
[5]
ECO