146
Answering system
Answering system settings
3. Press Record to record your announcement. The system announces,
“Record after the tone. Press 5 when you are done.”
OUTGOING ANNOUNCEMENT
Record
Default
4. After the tone, speak towards the base microphone. Press 5 on the base to
end the recording.
5. Press Stop & Save to confirm. Press Cancel to cancel the recording.
To listen to the recorded announcement , press Play .
To reset your outgoing announcement:
Using a cordless handset:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to scroll to Answering sys, then press MENU/SELECT .
3. Press MENU/SELECT again to select Announcement.
4. The screen displays Play [2] Del [3] Rec [7] and it announces, “To play, press
2. To record, press 7.” Press 3 to delete your recorded announcement. The
handset displays Annc deleted and announces, “Announcement deleted.”
Using the telephone base:
1. Press Menu sokey, and choose Answering system .
2. Press Default . The screen shows Reset to default announcement?.
3. Press Yes to delete your recorded announcement. The screen displays
Anncouncement reset to default.
When your announcement is reset, the system answers calls with the
default announcement, as described above. You cannot delete the default
announcement.
To Next Page
Loading...
