AT&T DLP73590 - Set Call Screening Mode On;Off

129
Smart call blocker
Call block settings
Set call screening mode on/o
The Smart call blocker feature is set to No screening by default.
If you wish to use the screen unknown home calls, make sure you have set up
your lists of welcome callers and unwelcome callers by adding their telephone
numbers to the Directory (page 90), Star name list (page 124) and Block
list (page 119).
To turn call screening mode on or o:
Using a cordless handset:
1. Press CALL BLOCK to enter the SCB screening menu when the telephone is
not in use.
- OR -
Press MENU/SELECT to enter the main menu. Then, press CID or DIR to
scroll to SCB screening. Press MENU/SELECT.
2. Press CID or DIR to scroll to your preferred options of Smart call blocker.
There are four options:
- No screening
- Screen unknown
- UnknownToAns.S
- Block unknown
3. Press MENU/SELECT to save the setting. You hear a confirmation tone.