AT&T DLP73590 - Make, Answer or End a Cell Call

65
Telephone operation
Telephone operation
Make, answer or end a cell call
The DLP73290/DLP73390/DLP73490/DLP73590 can be used to make or
answer calls on the cell line. You can connect a maximum of two Bluetooth
enabled cell phones to the telephone base.
Make sure you have pair your cell phone(s) to the telephone system. Go to Add
a Bluetooth cell phone/ headset (page 31 and page 33).
To make a cell call:
1. Press CELL on the handset. The handset displays Select a device.
-OR-
Press /CELL on the telephone base.
f If you have only one cell phone connected to the telephone base, press
MENU/SELECT to select the only device.
f If you have two cell phones connected to the telephone, press or to
select a cell phone and then press MENU/SELECT.
2. Enter the telephone number on the handset to dial.
-OR-
Enter the telephone number on the telephone base to dial.
To predial a cell call:
1. Enter the telephone number.
2. Press CELL on the handset to dial.
-OR-
Press /CELL on the telephone base to dial.
f If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls.
f If you have two cell phones connected to the telephone base, press or
to select a cell phone and then press MENU/SELECT.