84
Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1. To begin a PTT call to a single handset:
f Press FLASH/PTT.
} If you only have one handset, the base screen displays to Handset 1 and
Connecting....
} If you have more than one handset, press / / / to choose a
handset, or use the dialing keys to enter the destination handset
number.
The telephone base shows to Handset X and Connecting...
.
X represents the destination handset number
. When the connection is made,
the telephone base displays Press and hold [PTT] key to talk.
2. Press and hold FLASH/PTT. A chirp indicates your microphone is on. Speak
towards the telephone base. Your voice is broadcast to the destination
handset. While you are speaking, the telephone base shows Release [PTT]
key when you finish.
3. Release FLASH/PTT after speaking. Both devices beep once again and the
screens show Press and hold [PTT] key to talk, then you can press and hold
FLASH/PTT to continue speaking or the destination device can respond (see
Answer a PTT call on page 86).
4. To end the PTT call, press End . The telephone base shows
Push to talk Ended for a few seconds.
To Next Page
Loading...
