24
Directory
New directory entries
To create and store a new directory entry
1. Press  MENU/SELECT  in  idle  mode  to  enter  the 
feature menu.
2. Press  MENU/SELECT  again  to  enter  the 
DIRECTORY  when  it  is  highlighted  with  a  > 
symbol.
3. Press the up or down NavKey 
 
to highlight  
STORE.
4. Press MENU/SELECT
5. Enter the telephone number when prompted. 
   • Use the dial pad to enter up to 32 digits. 
       – Press   or   to move the cursor to    
    the left or right.
       – Press MUTE/DELETE to erase numbers.
       – Press and hold REDIAL/PAUSE to enter a  
    three-second dialing pause.
 -OR-
   •  Copy a number from redial by pressing    
 REDIAL/PAUSE then press   or   to locate  
      the number to copy. Press MENU/SELECT       
      to copy the number.
6. Press MENU/SELECT to save the number in the 
display. The display will show ALREADY SAVED 
if the number is already in the directory.
NOTE: Each line can hold 16 digits, so if you enter a    
   number longer than 16 digits, the numbers will be dis- 
   played in the following line. 
>
>
>