13
Handset settings
Ringer volume
You can set the handset ringer volume level (1-6), or turn
the ringer off. When the ringer is off, and Ringer off
appears on the handset screen.
Press MENU/SELECT in idle mode to enter the main menu.
Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
Press MENU/SELECT to select Ringer volume.
Press CID or DIR to sample each volume level.
Press MENU/SELECT to save your preference.
notes:
The handset ringer volume also determines the ringer volume of intercom calls and
paging tones.
If the handset ringer volume is off, that handset ringer is silenced for all incoming calls.
However, that handset still plays the paging tone when responding to the handset locator
feature (see Handset locator on page 26).
While the telephone is ringing, press OFF/CANCEL or MUTE/DELETE to silence the ringer
temporarily on that handset only (see Temporary ringer silencing on page 19).
Ringer tone
You can choose one of 10 ringer tones for the handset.
Press MENU/SELECT in idle mode to enter the main menu.
Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
Press CID or DIR to scroll to Ringer tone, then press
MENU/SELECT.
Press CID or DIR to sample each tone.
Press MENU/SELECT to save your preference.
note: If you turn off the handset ringer volume, you will not hear
ringer tone samples.
1.
2.
3.
4.
5.
•
•
•
1.
2.
3.
4.
5.
Ringer volume
ECO
Volume:
ECO
Ringer tone
ECO
Tone: 1
ECO
Telephone settings
To Next Page
Loading...
