38
Directory
Speed dial
Reassign a speed dial number
Press MENU/SELECT when the handset is in idle mode.
Press MENU/SELECT to choose Directory.
Press CID or DIR to scroll to Speed dial, then press MENU/SELECT.
Press CID or DIR, or the dialing key (2-9, 0) corresponding to the
location you wish to reassign.
Press MENU/SELECT twice. The screen shows Reassign SD.
Press MENU/SELECT. The handset briefly shows Copy from DIR.. and then
enters your directory list.
Press CID or DIR to scroll to the phone number you wish to reassign to
the selected speed dial location.
Press MENU/SELECT to save. The name (up to 12 characters) of the desired
directory entry appears in the selected speed dial location.
Clear a speed dial location
Follow Steps 1-3 in Reassign a speed dial number to
enter the speed dial list.
Press CID or DIR to scroll to the desired speed dial
location.
Press MUTE/DELETE. The screen displays Clear SD #X?
(X represents the speed dial location number).
Press MENU/SELECT to confirm.
note: Clearing the speed dial locations does not affect the entries in
the directory.
Assign your speed dial voicemail number
See the Set speed dial voicemail number section on page 14 for
instructions on assigning your speed dial voicemail number.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
0: Robert Brown
ECO
Clear SD #X?
ECO
To Next Page
Loading...
