16
Telephone settings
Handset settings
Set date/time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call (see About caller ID on page 40).
However, the year must be set so that the day of the week can be calculated
from the caller ID information.
Follow the steps below to set the month, date, year and time.
Press MENU/SELECT in idle mode to enter the main menu.
Press CID or DIR to scroll to Set date/time, and then
press MENU/SELECT.
Press CID or DIR to select the month, then press
MENU/SELECT, or enter the 2-digit number (01-12)
using the dialing keys (0-9).
Press CID or DIR to select the day, then press
MENU/SELECT, or enter the 2-digit number (01-31)
using the dialing keys (0-9).
Press CID or DIR to select the year, or enter the
2-digit number (00-99) using the dialing keys (0-9),
then press MENU/SELECT.
Press CID or DIR to select the hour, then press
MENU/SELECT, or enter the 2-digit number (00-23)
using the dialing keys (0-9).
Press CID or DIR to select the minute, then press
MENU/SELECT, or enter the 2-digit number (00-59)
using the dialing keys (0-9).
Press CID or DIR to choose AM or PM. Press MENU/SELECT to save.
1.
2.
3.
4.
5.
6.
7.
8.
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
To Next Page
Loading...
