10
Making, answering and ending calls
Making a call
Press PHONE/FLASH or
SPEAKER and then dial a telephone
number, or predial by first dialing the number and then pressing
PHONE/FLASH or
SPEAKER. When entering the number
before pressing PHONE/FLASH or
SPEAKER, you can:
Press and hold REDIAL/PAUSE to insert a three-second dialing
pause (a P appears).
Press DELETE to make corrections.
Press and hold OFF/CLEAR to return to the idle mode.
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
Answering a call
Press PHONE/FLASH,
SPEAKER, or any dialing key (known as Any Key Answer).
Ending a call
Press OFF/CLEAR or put the handset in the telephone base to
end the call (known as Auto Off).
Speakerphone
During a call, press
SPEAKER to switch between speakerphone and normal handset
use. Press OFF/CLEAR to hang up.
Temporary ringer silencing
While the telephone is ringing, press OFF/CLEAR or MUTE to silence the ringer
temporarily on that handset only. This turns off the ringer without disconnecting the
call. The next incoming call rings normally at the preset volume.
•
•
•
To Next Page
Loading...
Need help?
General
