10
Telephone settings
Use Feature summary on page 9 to find and set features. The following are a few
examples of common features to set. Refer to Handset settings and Answering
system settings in the online user’s manual for detailed instructions on setting all
telephone features.
Ringer volume
You can set the handset ringer volume level (1-6), or turn the ringer off. When the
ringer is off, appears on the handset screen.
Press MENU/SELECT in idle mode to enter the main menu.
Press
CID or
DIR to scroll to Ringers, then press
MENU/SELECT.
Press MENU/SELECT again to select Ringer volume.
Press
CID or
DIR to sample each volume level.
Press MENU/SELECT to save your preference.
NOTE: If the handset ringer volume is off, that handset ringer is
silenced for all incoming calls. However, that handset still plays the
paging tone when responding to the find handset feature.
Telephone base ringer volume
When the telephone base is idle, press /VOLUME or /VOLUME on the telephone
base to adjust the ringer volume.
1.
2.
3.
4.
5.
Ringer volume
ECO
Volume:
ECO
To Next Page
Loading...
Need help?
General
