AT&T EL52206 Quick Start Guide

24
Voice guide
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set the
number of rings, and set the message alert tone.
This feature is only available on the cordless handset.
Press MENU/SELECT when the handset is idle.
Press CID or DIR to scroll to Answering sys, then press MENU/SELECT.
Press CID or DIR to scroll to Voice guide, then press MENU/SELECT. You hear
a voice prompt, “Hello! This voice guide will assist you with the basic setup of your
answering system.“
Set up your answering system by inputting designated numbers, as instructed in
the voice guide.
NOTE: You can press OFF/CANCEL to quit the voice guide at any time.
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5, or 6
rings. You can also select Toll saver. If toll saver is selected, the answering system
answers a call after two rings when you have new messages, and after four rings
when there are no new messages. This feature allows you to check for new messages
and avoid paying long distance charges if you are calling from out of your local area.
Unless you change it, the answering system answers an incoming call after three rings.
To set the number of rings:
Press MENU/SELECT on the handset when it is not in use.
Press CID or DIR to scroll to Answering sys, then press
MENU/SELECT.
Press CID or DIR to scroll to Ans sys setup, then press
MENU/SELECT.
Press CID or DIR to scroll to
#
of rings, then press
MENU/SELECT.
Press CID or DIR to scroll and choose among 2, 3, 4, 5, 6
or Toll saver.
Press MENU/SELECT to save your setting.
NOTE: If you have muted the first ring, you will hear one ring less before the answering
system answers the incoming calls.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
# of rings
ECO
3
ECO

AT&T EL52206 Specifications

General

Brand	AT&T
Model	EL52206
Category	Cordless Telephone
Language	English