AT&T EL52206 Quick Start Guide

19
Caller ID
This product supports caller ID services offered by most telephone service providers.
Caller ID allows you to see the name, number, date and time of calls. The available
caller ID information will appear after the first or second ring.
Missed (new) call indicator
The telephone base stores the last 30 incoming calls as the caller ID information.
When a handset is in idle mode and has new or missed calls, the screen shows
XX missed calls. If you do not want to review the missed calls one by one, but still
want to keep them in the caller ID log, you can press and hold OFF/CANCEL for
four seconds when the handset is idle.
Review the caller ID log
When a handset is in idle mode, press CID.
Press CID or DIR to scroll through the list.
Press (pound key) repeatedly to show different dialing options.
Press 1 repeatedly if you need to add or remove 1 in front of the telephone
number before dialing or saving it in the directory.
Press PHONE/FLASH or /SPEAKER to dial the displayed telephone number.
Delete caller ID log entries
To delete one entry:
While viewing an entry, press MUTE/DELETE to delete the entry from the caller ID log.
To delete all entries:
Press MENU/SELECT in idle mode.
Press CID or DIR to scroll to Caller ID log, then press
MENU/SELECT.
Press CID or DIR to scroll to Delete all, then press
MENU/SELECT twice. Once deleted, you cannot retrieve
the entries.
Save a caller ID log entry to the directory
When a handset is in idle mode, press CID.
Press CID or DIR to scroll through the list.
When the desired entry displays, press MENU/SELECT.
Press MENU/SELECT again to choose To Directory. The screen shows
Enter number. If necessary, modify the number (page 17).
Press MENU/SELECT to continue. The screen shows Enter name. If necessary,
modify the name (page 17).
Press MENU/SELECT to save.
1.
2.
•
•
3.
1.
2.
3.
1.
2.
3.
4.
5.
6.
19
Delete all
ECO

AT&T EL52206 Specifications

General

Brand	AT&T
Model	EL52206
Category	Cordless Telephone
Language	English