60
Answering system
Answering system settings
Message alert tone
When the message alert tone is on, and there is at least one new message,
the telephone base beeps every 10 seconds. By default, the message alert
tone is set to O.
To change the setting:
1. Press MENU/SELECT when the handset is idle.
2. Press
CID or
DIR to scroll to Answering sys,
then press MENU/SELECT.
3. Press
CID or
DIR to scroll to Ans sys setup,
then press MENU/SELECT.
4. Press
CID or
DIR to scroll to Msg alert tone, then
press MENU/SELECT.
5. Press
CID or
DIR to choose On or O.
6. Press MENU/SELECT to save your setting.
NOTES:
X The message alert tone beeps only if all the following conditions are met:
– The answering system is on.
– The message alert tone is on.
– There are new messages.
X To temporarily turn o the message alert tone, see Temporarily turn o the message alert
tone on page 64.
Msg alert tone
ECO
Off
ECO
To Next Page
Loading...
Need help?
General
