77
Appendix
Handset display screen messages
Number repeated
The telephone number you have entered is already stored in the
directory.
Out of range or
no pwr at base
The handset has lost communication with the telephone base.
Outside call You switched to an external call during an intercom call.
** Paging ** The telephone base is paging all handsets.
Phone The handset is on a call.
Put in charger
The battery is very low. The handset should be placed in the
telephone base or charger.
Quiet mode o The quiet mode is turned o.
Quiet mode on The quiet mode is turned on.
Rec mem low The answering system has less than 3 minutes to record.
Rec mem full The answering system memory is full.
Ringer muted The ringer is muted temporarily during an incoming call.
Setting Ans sys The handset is playing voice guide.
Speaker The handset speakerphone is in use.
To register HS...
...see manual
The handset is not registered to any telephone base.
To screen call
press [SELECT]
The system is recording a message. Press MENU/SELECT to screen a
call on a handset.
Unable to call
X Intercom failed.
X You try to join a call when there are already four handsets on
that call.
X You try to make a call when the handset is out of range.
XX missed calls There are XX new calls in the caller ID log.
XX new messages There are XX new messages in the answering system.
To Next Page
Loading...
Need help?
General
