11
Options while on a call
Volume control
While on a call, press DIR/VOLUME to increase or press
CID/VOLUME to decrease the listening volume.
note: The handset earpiece volume setting (1-5) and speakerphone
volume setting (1-6) are independent. Changing one does not aect
the other.
Join a call in progress
You can use two system handsets at the same time on an outside
call. If a handset is already on a call and you would like to join
the call, press PHONE/FLASH or
SPEAKER on another
system handset.
To exit the call, press OFF/CLEAR or place the handset in the
telephone base or charger. The call does not end until all handsets hang up.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID history or redial list. Doing this can be useful if you wish to access other
numbers (such as bank account numbers or access codes).
To dial a number from the directory, caller ID history or redial list while on a call, access
the number through the menu system:
While on a call, to show the directory or caller ID history, press MENU/SELECT, scroll to
>DIRECTORY or >CALL LOG. Press MENU/SELECT.
-OR-
While on a call, press REDIAL/PAUSE to show the redial list.
Scroll to the desired number or press the dial pad keys to nd the desired directory
entry (see To search by name in the online user’s manual for more options).
Press MENU/SELECT. The selected number is dialed.
Redial
Each handset stores the 20 most recently called numbers in the redial list.
To review and call numbers in the redial list, press REDIAL/PAUSE in idle mode. The
most recently called number appears on the screen.
If it is not the desired number, press DIR or CID to scroll through the numbers in
the list.
Once the desired number appears, press PHONE/FLASH or
SPEAKER to dial the
number. Press OFF/CLEAR to exit the redial list.
1.
2.
3.
1.
2.
3.
To Next Page
Loading...
