17
Telephone settings
Handset settings
Set date/time
The answering system announces the day of the week and time of each
message received prior to playing it. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call (see
About caller ID on page 40). However, the year must be set so that the day
of the week can be calculated from the caller ID information.
Follow the steps, as mentioned below, to set the month, date, year and time.
1. Press in idle mode to enter the
main menu.
2. Press or to scroll to Set date/time, and then
press .
3. Press or to select the month, then press
, or enter the 2-digit number (01-12) using
the dialing keys (0-9).
4. Press or to select the day, then press
, or enter the 2-digit number (01-31) using
the dialing keys (0-9).
5. Press or to select the year, or enter the
2-digit number (00-99) using the dialing keys (0-9),
then press .
6. Press or to select the hour, then press
, or enter the 2-digit number (00-23)
using the dialing keys (0-9).
7. Press or to select the minute, then press , or
enter the 2-digit number (00-59) using the dialing keys (0-9).
8. Press or to choose AM or PM. Press to save.
NOTE: If the date and time is not set when the message is recorded, the system announces
“Time and date not set” before it plays the message.
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
To Next Page
Loading...
