45
Caller ID
Caller ID operation
Save a caller ID log entry to the directory
1. While reviewing the caller ID log, press or to browse through
the caller ID log.
2. When the desired entry displays, press .
3. Press again to choose To Directory.
4. When the screen shows Enter number, use the dialing
keys to modify the telephone number (up to 30 digits).
• Press or to move the cursor to the le
or right.
• Press and hold to enter a 3-second dialing pause
(a P appears).
• Press to erase a digit.
• Press and hold to erase all digits.
5. Press to save the number in the display. The screen shows
Enter name.
6. Use the dialing keys and refer to Character chart on page 34 to modify
the name (up to 15 characters).
• Press 0 to add a space.
• Press or to move the cursor to the le or right.
• Press to erase a character.
• Press and hold to erase all characters.
7. Press to save. You hear a conrmation tone.
NOTES:
• The screen shows Number repeated if the number is already in the directory. You cannot
save the same number more than once.
• If you try to save a caller ID log entry to the directory without a number, the handset sounds
an error tone and then returns to the caller ID log entry.
• If the telephone number has more than 15 digits, only the last 15 digits appear in the caller ID
log. However, the telephone can still save all digits (up to 24 digits) of that telephone number
from the caller ID log in the directory.
• You might need to change how a caller ID number is saved in the directory if the entry does
not appear in the correct format. Caller ID numbers might appear with an area code that
is not necessary for local calls, or without a 1 that is necessary for long distance calls. For
details, see View dialing options on page 43.
To Directory
ECO
To Next Page
Loading...
Need help?
General
