AT&T EL52345 - Handset Locator

28
Telephone operation
28
Handset locator
You can use the handset locator feature to nd
misplaced handsets.
To start the paging tone:
• Press on the telephone base
to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
• Press , ,
or any dialing key (0-9, or
#
) on
the handset(s).
-OR-
• Press on the telephone base.
-OR-
• Place the handset in the telephone base or charger.
NOTES:
• If you press on a handset, the ringer of that handset is silenced but the paging
tone continues on the other handsets.
• If a handset is accessing the answering system, on a call (intercom call or outside call), or out
of range, that handset does not beep when paged.
• You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.