18 19
Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation Steps
Add an entry in the
directory
1. MENU.
2. or -> Directory -> SELECT.
3. SELECT again to choose Add contact.
4. Enter a telephone number up to 30 digits ->
SELECT
.
5. Enter a name up to 15 characters -> SELECT to save.
Search/dial an entry
1. DIR in idle mode -> / to select the desired
directory entry.
2.
PHONE/FLASH or /SPEAKER to call.
Add a call log entry in
the directory
1. CID -> or -> SELECT to select the desired
entry.
2. SELECT again to choose To Directory.
3. Edit the telephone number if needed -> SELECT.
4. Edit the name if needed -> SELECT to save.
This product supports caller ID services oered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Review and dial a number in the call log
1.
CID in idle mode -> or to scroll through the list.
2.
PHONE/FLASH or /SPEAKER to call when the desired entry is
displayed.
f You can press # repeatedly to add or remove 1 in the number before dialing.
Caller ID
Caller ID
Save a caller ID log entry to the directory
1.
CID in idle mode -> or to scroll through the list.
2. When your desired caller ID entry displays on the handset -> SELECT.
3. SELECT again to choose To Directory.
4. Edit the telephone number if needed -> SELECT.
5. Edit the name if needed -> SELECT to save.
Delete a caller ID log entry
1.
CID in idle mode -> or to scroll through the list.
2. When your desired caller ID entry displays on the handset-> DELETE.
Erase missed calls indicator in the call log
When you have missed calls, the screen shows XX missed calls.
This is the total number of calls you have not yet reviewed in the call log.
To erase this missed call indicator, you can:
X Scroll and review the call log one by one, or
X Press and hold
OFF/CANCEL on the handset when it is not in use.
To Next Page
Loading...
Need help?
General
