14 15
Voice language
Note: This feature is available in Canada version only.
The voice prompt language is preset to English. You can select English or French to
be used for all voice prompts.
1. -> or -> Settings -> SELECT.
2. or -> Voice language -> SELECT.
3. or to choose English or Français-> SELECT.
Dial mode
The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you
need to change the dial mode to pulse dialing before using the telephone to make
a call.
1. MENU -> or -> Settings -> SELECT.
2. or -> Dial mode -> SELECT.
3. or to choose Touch-tone or Pulse -> SELECT.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone signals
to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the number. The telephone sends touch-tone
signals. The telephone automatically returns to pulse dialing mode aer you end
the call.
Set speed dial voicemail number
If you subscribe to a voicemail service offered by your telephone service provider,
you can save the voicemail number to 1 on each handset for easy access. When
you want to retrieve voicemail messages, press and hold 1.
1. MENU -> or -> Settings -> SELECT.
2. or -> Voicemail # -> SELECT.
3. Enter the voicemail number (up to 30 digits) -> SELECT to save.
Note: Contact your telephone service provider for more information and assistance about your
voicemail service.
Initial basic settings
Operation
Steps
Making a call
Press
PHONE/FLASH or /SPEAKER ->
Enter the telephone number.
On-hook dialing
(predialing)
Enter the telephone number ->
Press
PHONE/FLASH or /SPEAKER to call.
Answering a
call
Press
PHONE/FLASH or /SPEAKER, or press any
dialing keys (0-9, TONE or #).
Ending a call
Press
OFF/CANCEL or return the handset to the
telephone base or charger.
Handset
speakerphone
During a call, press /SPEAKER to switch between
handsfree speakerphone and normal handset use.
Redial
Press REDIAL repeatedly to select the desired entry ->
PHONE/FLASH or /SPEAKER to call.
Volume control
Using a cordless handset:
Press q CID/VOLUME to decrease or press p DIR/VOLUME to
increase the listening volume during a call.
Using the telephone base:
Press q/VOLUME - to decrease or press p/VOLUME + to
increase the listening volume.
Call waiting
(Requires
subscription
from telephone)
f Press
PHONE/FLASH to put current call on hold and to
take the new call.
f Press
PHONE/FLASH at any time to switch back and
forth between calls.
Join a call in
progress
(Use up to two
system handsets
at a time on an
outside call.)
f When a handset is already on a call, press
PHONE/FLASH or /SPEAKER on another handset
to join the call.
f Press
OFF/CANCEL or place the handset in the
telephone base or handset charger to exit the call. The call
continues until all handsets hang up.
Intercom
(Use for
conversations
between two
handsets.)
f Press INT when the handset is not in use.
f If you have two handsets only, the destination handset
rings.
f If you have more than two handsets or devices, use
the dialing keys to enter the handset number (1-5). The
destination handset rings.
f To answer the intercom call, press
PHONE/FLASH,
/SPEAKER, INT or any dialing keys (0-9, TONE or #)
on the destination handset.
f To end the intercom call, press
OFF/CANCEL or place
the handset back in the telephone base or charger.
Operate
To Next Page
Loading...
