Need help?Do you have a question about the AT&T Home Base and is the answer not in the manual?
Power| back-up battery | included |
|---|
Lists the items included in the AT&T Home Base package.
Explains the meaning of each LED indicator on the AT&T Home Base.
Provides important information before starting the AT&T Home Base installation.
Details the steps for installing the AT&T Home Base and connecting devices.
Instructions for setting up voicemail on the AT&T Home Base.
Describes indicators for new voicemail messages.
How to listen to and manage voicemail messages.
Instructions for accessing voicemail from a different phone.
Instructions for connecting Wi-Fi and Ethernet devices to the AT&T Home Base.
How to connect devices using Wi-Fi Protected Setup (WPS).
Steps to connect a device to the AT&T Home Base using an Ethernet cable.
Guide to customizing the Wi-Fi network name and password.
Information on receiving and viewing important messages from AT&T.
How to view, block, and unblock devices connected to the AT&T Home Base.
How to set up a home answering machine with the AT&T Home Base.
Instructions for adjusting the AT&T Home Base volume.
How to turn the AT&T Home Base on and off.
Information on using TTY/TDD devices with the AT&T Home Base.
Information regarding emergency 911 calls and location services.
Details on the backup battery and operation during power outages.
Lists devices and services compatible and incompatible with the AT&T Home Base.
Covers general troubleshooting problems and their solutions.
Addresses common issues related to phone functionality and calls.
Provides solutions for problems with Internet connectivity and speed.
Manages Wi-Fi network name, password, broadcast, and security settings.
View and manage connected devices, including blocking/unblocking.
Configures Wi-Fi security policies like WPA/WPA2-PSK.
Guides on enabling and using Wi-Fi Protected Setup for easy connection.
Manages mobile network connection mode and signal strength.
Configuration of Access Point Names (APN) for network access.
Enables or disables filtering of network traffic based on MAC, IP, or port.
Allows mapping external ports to internal device ports for network access.
Allows changing the default administrator login for the Home Base Manager.
Configuration of router settings including IP address, DHCP, and UPnP.
Manages device time settings via manual input or SNTP auto-synchronization.
Resets all settings to factory defaults or restarts the device.
Instructions on how to obtain warranty service for the AT&T Home Base.
Information about other available warranty programs.
To Next Page
