AT&T Home Base - Getting to Know Your Device; LED Indicators

Getting to Know Your Device
Power
Voicemail
Information
(See “AT&T Home Base
Manager” on page 12)
Wi-Fi
Signal Strength
WPS*
* Allows WPS-enabled devices to be connected via Wi-Fi without typing a Wi-Fi password.
For detailed instructions, please refer to page 16.
Telephone
Ports
Ethernet
Power
Input
On/Off
2
Getting Started
LED Indicators
The table below describes possible states for each of the LED indicators.
Key Icon Name Indicator Status
Power
Green steady On
Green blinking Battery: More than 50%
Yellow blinking Battery: 20 – 50%
Red blinking Battery: Less than 20%
Off No power
Voicemail
Green blinking New voicemail
Off No new voicemail
Information
Green blinking
Check the AT&T Home Base
Manager – see messages
Off No unread messages
Wi-Fi
Green steady Wi-Fi on
Green flickering Data transferring
Off Wi-Fi off
Signal
Strength
Green steady Strong signal
Yellow steady Moderate signal
Red steady No service
Red blinking No service or SIM error
Getting Started 3