EasyManua.ls Logo

AT&T Home Base - Connect Other Devices; Connect WPS devices; Connect via Ethernet; Important Information

AT&T Home Base
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important Information
In-Home Wiring
Interconnecting to home telephone wiring is not necessary, but is possible;
however, it is not recommended unless you possess sufficient knowledge of
electrical systems. Use with home wiring requires the physical disconnection from
other services, including the landline coming into your home. Use of a qualified
licensed electrician is highly recommended. Improper installation may result in
phone equipment damage or even a fire.
Important Information 23
22
E911 Service
For emergency calls, you may have to provide your location address to the 911
operator.
Power Outages
The AT&T Home Base has a back-up battery in the event of a power outage, with
talk time of up to 100 minutes depending on environmental factors. However,
a landline phone requiring separate electric power to operate (e.g., cordless
phones) connected to a Home Base will not place or receive calls (including 911
calls) during a power outage.
The AT&T Home Base will disable Wi-Fi to conserve power while using the back-
up battery when there are no devices connected. To re-enable Wi-Fi while using
the back-up battery, press the On/Off button for one (1) second. Or, if power is
available, plug the AT&T Home Base into an electrical wall outlet.
If you experience a power outage and your battery is fully depleted, it will be
necessary to restart your device when power is restored by pressing and holding
the On/Off button for three (3) seconds until the power light stays steady green.
Device Compatibility
The AT&T Home Base is not compatible with wireless messaging services, home
security systems, fax service, medical alert systems, medical monitoring systems,
credit card machines, IP/PBX Phone systems, or dial-up Internet service. May not
be compatible with your DVR/Satellite systems; please check with your provider.
DSL customers should contact their provider before transferring a phone number
to ensure uninterrupted DSL Internet service.
The AT&T Home Base cannot be used to make 500, 700, 900, 976, 0+ collect,
operator-assisted, or dial-around calls (e.g. 1010-XXXX).
Important Information

Other manuals for AT&T Home Base

Related product manuals