39
To enable Firewall
1. From the Dashboard , click Security > Firewall IPv4 or Firewall IPv6,
or click the Firewall icon on the dashboard.
2. Under the Common tab select Yes next to Enable Firewall.
3. Click Save .
Note: Disabling the firewall is not recommended without careful
consideration and additional protective measures in place.
Ping Request from WAN
Turning on Ping Request from WAN allows outside clients to ping the public IP
address from your 5G Gateway which may be needed to diagnose network
connectivity issues.
To enable/disable Ping Request from WAN
1. From the Dashboard , click Security > Firewall IPv4 or Firewall IPv6,
or click the Firewall icon on the dashboard.
2. Under the Common tab select Yes or No next to Ping Request from
WAN.
3. Click Save .
Note: Avoid leaving this feature enabled for longer periods of time than
necessary. Doing so could leave your device open to security threats.
Net Service Filter
The Network Services filter blocks or allows the LAN to WAN communication
for specified devices, for specified network services.
To Next Page
Loading...
