Making a Conference Call
To add parties to a call (max. 4 parties plus you):
Telephone or
Extension Number +
Conf
+
Telephone or
Extension Number +
Conf
1.
2.
3.
4.
Call the first party (can use Speed Dial or Auto Dial buttons).
After the first party answers, press
Conf
.
Press the idle
Line
button and call the second party (or press
Intercom
and extension number to add an inside party).
After the second party answers, press
Conf
again; you are
connected with both parties. To add others, repeat steps 2–4.
The lights at all extensions in the conference flash red and green.
To drop the last outside party added to the call:
To Drop:
Feature
0
6
1.
Press
Feature
0
6
.
NOTE: You cannot add more than 2 outside parties, transfer a
conference call, or join a conference call.
Joining a Call
To connect yourself to an outside call being conducted at
another extension:
Line
or
Intercom
6
8
+
Line Number
1.
2.
Press the
Line
button (steady red light) or dial
Intercom
6
8
and
the two-digit line number.
Lift the handset.
NOTE: You cannot join an inside call, a conference call, or a call at an
extension with Privacy turned on.
Making a Call to a Calling Group
To call everyone in a Calling Group* who is not busy on another
call:
Ringing Call:
Intercom
7
+
Group Number (1-4)
Voice-Signaled Call:
Intercom
★
7
+
Group Number (1-4)
1.
2.
3.
Press Intercom .
Lift handset.
Dial
7
and a group number to ring the group, or press
★
7
plus
a group number to page those in the group who have MLS-model
phones with speakers.
You are connected to the first extension to answer.
Loudspeaker Paging
To make an announcement over the loudspeaker paging
system (if one is connected to your PARTNER
II
system):
Intercom
7
0
1.
2.
3.
Press
Intercom .
Lift handset.
Dial
7
0
,
then make your announcement.
* Calling Group, Pickup Group, and Hunt Group extensions are listed on a separate form. See your
System Manager.
1
To Next Page
Loading...
