AT&T Partner 34D - Dial-Code Features; Do Not Disturb; Exclusive Hold; Save Number Redial

Dial-Code Features
You can use a dial-code feature in either of two ways:
■
Dial it manually (except for Do Not Disturb and Privacy,
which require programming on buttons with lights).
■
Press a button programmed with the feature (see
"Programming" on panel 4).
Dial-Code Feature
To Dial
Manually
To Use On a
Button
Do Not Disturb
Prevents any calls from ringing at your
phone. Transferred calls return to sender
and inside calls get a busy signal. Outside
callers hear the usual ringing. Recom-
mended only if someone else answers
your outside calls. To use this feature,
you must program  Feature   0   1  on a
button with lights.
Exclusive Hold
Places a call on hold so other extensions
with the line cannot pick it up.
Recall
"Recalls" a dial tone. Use Recall to end a
call without hanging up—you will get a dial
tone and can then make another call.
Save Number Redial
Saves the last outside number you dialed
into temporary memory. Use the dial code
to save a number before you hang up on
a busy or non-answering call. Once
saved, you can redial it at any time. The
number stays in memory until a different
one is saved. System Speed Dial
numbers cannot be saved.
Last Number Redial
Redials the last outside number you
dialed. (You cannot redial a System
Speed Dial number with this feature.)
Conference Drop
Drops the last outside party added to a
conference call.
Privacy
Prevents other people with the same line
from joining your calls. To use this
feature, you must program  Feature   0   7 
on a button with lights.
Touch-Tone Enable
When on a rotary line, allows you to
access phone services that require you to
dial touch-tone digits. After you make the
call to the service and are asked to enter
touch-tone digits, turn on Touch-Tone
Enable to change the rest of the digits
you dial to touch-tone.
Not available
Press the
button to turn on
and off
Dial  Feature   0   2 
Dial  Feature   0   3 
Dial  Feature   0   4 
before hanging up—
To redial later, press
 Feature   0   4  again
Dial  Feature   0   5 
Dial  Feature   0   6 
Not available
Dial  Feature   0   8 
Can use this feature only if programmed onto a button with lights (see panel 4).
Press the button
Press the button
Press the button
before hanging up—
To redial later, press
the button again
Press the button
Press the button
Press the
button to turn on
and off
Press the button
5