AT&T TL86003 User Manual

8
Getting started
Belt clip & optional handset
To attach the belt clip:
Snap the belt clip
into the slots on both
sides of the handset as
shown in the figure.
For handsfree telephone conversations, you can use any industry
standard 2.5 mm headset (purchased separately). For best results,
use an AT&T 2.5 mm headset. To purchase a headset, visit our
website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Plug a 2.5 mm headset (not
included) into the jack on
the side of handset (beneath
the small plastic cover).
Lift the plastic
cover here.
Side the handset
To remove the
belt clip:
Gently lift either
of the belt clip
tabs, shown in the
figure, outwards
to remove the
belt clip from the
handset.

AT&T TL86003 Specifications

General

Speakerphone	yes
Volume Control	yes
Intercom	yes
Incoming Lines	2
Display Type	digital
Caller ID	yes
Call Waiting	yes
Conference Call	yes
Mute	yes
Backlit Keypad	no
Bluetooth	yes
Frequency	dect 6.0 digital