Getting started
9
Adding and registering handsets
Before using a new TL86003 handset, you must register it with
an AT&T TL86103 telephone system (purchased separately). These
telephone systems can support up to 12 handsets.
The handsets provided within your product box are already
registered as HANDSET 1, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered (up
to HANDSET 12).
Register a handset to your telephone base for AT&T model TL86103
Using the telephone base:
Before you begin registration, make sure the
handset is out of the charger and shows
To register HS, see manual.
Press MENU on the telephone base in idle mode.
Press CID, DIR, /RECORD, or /DELETE
to highlight Settings, and then press SELECT .
Press CID, DIR, /RECORD, or
/DELETE to highlight Registration, and
then press SELECT .
The telephone base shows Registering...
Please wait.
Press # on the cordless handset for registration, and the
handset shows Registering... Please wait. It takes about
90 seconds to complete the registration process. Both the
telephone base and cordless handset display HANDSET X
Registered (X represents the registered handset number), and
beep when registration completes.
1.
2.
3.
4.
5.
6.
Appendix
Registering...
Please wait
BACK
Registering...
Please wait
To Next Page
Loading...
Need help?
General
