13
Appendix Appendix
Troubleshooting
If changing the telephone line cord does not help, the wall jack
(or the wiring to this wall jack) may be defective,
try using a different wall jack in your home to connect your
TL86103 telephone, or
contact your telephone service provider (charges may apply).
I cannot dial out.
Try all the suggestions above.
Make sure you have a dial tone before dialing. The cordless
handset may take a second or two to find the telephone base
and produce a dial tone. This is normal. Wait an extra second
before dialing.
Eliminate any background noise. Noise from a television, radio or
other appliances may cause the phone to not dial out properly.
If you cannot eliminate the background noise, first try muting
the cordless handset before dialing, or dialing from another
room with less background noise.
If other phones in your home are having the same problem,
contact your telephone service provider (charges may apply).
My cordless handset isn’t performing normally.
Make sure the power cord is securely plugged into the
telephone base. Plug the power adapter into a different working
electrical outlet not controlled by a wall switch.
Move the handset closer to the telephone base. You might have
moved out of range.
Reset the telephone base. Unplug the electrical power. Wait for
15 seconds, then plug it back in. Allow up to one minute for the
handset and telephone base to reset.
Other electronic products such as HAM radios and other
DECT phones can cause interference to your cordless telephone.
Try installing your telephone as far away as possible from these
types of electronic devices.
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
