109
Answering system
Answering system settings
Recording time
You can set the recording time limit for each incoming message. The default
setting is 3 minutes.
To change the setting:
Using a
handset
or telephone base:
Press MENU in idle mode to enter the main menu.
Press CID or DIR on the handset, or CID or DIR on
the telephone base to highlight Answering sys, then
press SELECT .
Press CID or DIR on the handset, or CID or DIR on
the telephone base to highlight Ans sys setup, then
press SELECT .
Press CID or DIR on the handset, or CID or DIR on
the telephone base to highlight Recording time, then
press SELECT .
Press
CID or DIR on the handset, or CID or DIR
on the telephone base
to choose from 3 minutes,
2 minutes, or 1 minute, then press SET to save.
You hear a confirmation tone.
1.
2.
3.
4.
5.
ANS SYS SETUP
Remote code
Msg alert tone
Recording time
BACK
SELECT
RECORDING TIME
3 minutes
2 minutes
1 minute
BACK
SET
ANS SYS SETUP
Remote code
Msg alert tone
Recording time
BACK SELECT
MSG ALERT TONE
3 minutes
2 minutes
1 minute
BACK SET
To Next Page
Loading...
